# Quick Answer: How Do You Use A Multimeter To Measure Voltage?

## What setting to use to check voltage?

You have to set the multimeter to a range that it can measure.

For example, 2V measures voltages up to 2 volts, and 20V measures voltages up to 20 volts.

So if you’ve measuring a 12V battery, use the 20V setting..

## How do you test 24 volts with a multimeter?

Testing a 24 Volt Transformer Switch the multimeter to “ohms” and insert the red and black test leads into the meter. The red lead goes into the slot that reads “ohms” and the black lead goes into the common opening. Touch the two leads together. The ohmmeter should read zero ohms or a closed circuit.

## How do you check if a wire is live without a multimeter?

For example, get a light bulb and socket, and attach a couple of wires to it. Then touch one to neutral or ground and one to the wire-under-test. If the lamp lights, it is live. If the lamp doesn’t light, then test the lamp on a known live wire (like a wall socket) to make sure it actually lights.

## Can you use a multimeter on a live circuit?

When using a meter on a live circuit you would use the volts AC and select a range that is higher than what you expect 120V standard outlet herein the U.S. 220v across the Pond. If auto range select the correct function and make sure leads are in the correct locations on the meter.

## What are the symbols on multimeter?

Multimeter Symbols – What Do They Mean?Number 1: Hold Button. This button will “hold” whatever the meter reads after you have pressed it. … Number 2: AC Voltage. … SHIFT: Hertz. … Number 3: DC Voltage. … Number 4: Continuity. … Number 5: Direct Current. … Number 6: Current Jack. … Number 7: Common Jack.More items…•

## What does M stand for on a multimeter?

The selection knob allows the user to set the multimeter to read different things such as milliamps (mA) of current, voltage (V) and resistance (Ω). Two probes are plugged into two of the ports on the front of the unit. COM stands for common and is almost always connected to Ground or ‘-‘ of a circuit.

## What does DCV stand for on a multimeter?

Direct Current VoltageDirect Current Voltage (DCV): Sometimes it will be denoted with a V– instead. This setting is used to measure direct current (DC) voltage in things like batteries. Alternating Current Voltage (ACV): Sometimes it will be denoted with a V~ instead.

## What is the symbol of continuity in a multimeter?

Turn the dial to the symbol. When the probes are not touching the display shows “OL” which stands for Open Loop. (Open loop is another way of saying there is no continuity). When you touch the probes, the soundwave icon shows up in the display (upper right) and it also shows a number.

## How do you check 12 volt voltage with a multimeter?

Multimeters are generally not autoranging. You have to set the multimeter to a range that it can measure. For example, 2V measures voltages up to 2 volts, and 20V measures voltages up to 20 volts. So if you’ve measuring a 12V battery, use the 20V setting.